+++ /dev/null
-##
-## Extended Host and Service Information
-##
-
-define hostextinfo{
- hostgroup_name ubuntu-servers
- notes Ubuntu Linux servers
-# notes_url http://webserver.localhost.localdomain/hostinfo.pl?host=netware1
- icon_image base/ubuntu.png
- icon_image_alt Ubuntu Linux
- vrml_image ubuntu.png
- statusmap_image base/ubuntu.gd2
- }
--- /dev/null
+###############################################################################
+# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS 4.4.6
+#
+#
+# NOTES: This config file provides you with some example command definitions
+# that you can reference in host, service, and contact definitions.
+#
+# You don't need to keep commands in a separate file from your other
+# object definitions. This has been done just to make things easier to
+# understand.
+#
+###############################################################################
+
+
+
+################################################################################
+#
+# SAMPLE NOTIFICATION COMMANDS
+#
+# These are some example notification commands. They may or may not work on
+# your system without modification. As an example, some systems will require
+# you to use "/usr/bin/mailx" instead of "/usr/bin/mail" in the commands below.
+#
+################################################################################
+
+define command {
+
+ command_name notify-host-by-email
+ command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$
+}
+
+
+
+define command {
+
+ command_name notify-service-by-email
+ command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$
+}
+
+
+
+################################################################################
+#
+# SAMPLE HOST CHECK COMMANDS
+#
+################################################################################
+
+# Removed in Debian because it conflicts with the command of the same name
+# defined in ping.cfg, which is part of monitoring-plugins-basic.
+#
+## This command checks to see if a host is "alive" by pinging it
+## The check must result in a 100% packet loss or 5 second (5000ms) round trip
+## average time to produce a critical error.
+## Note: Five ICMP echo packets are sent (determined by the '-p 5' argument)
+#
+#define command {
+#
+# command_name check-host-alive
+# command_line $USER1$/check_ping -H $HOSTADDRESS$ -w 3000.0,80% -c 5000.0,100% -p 5
+#}
+
+
+
+################################################################################
+#
+# SAMPLE SERVICE CHECK COMMANDS
+#
+# These are some example service check commands. They may or may not work on
+# your system, as they must be modified for your plugins. See the HTML
+# documentation on the plugins for examples of how to configure command definitions.
+#
+# NOTE: The following 'check_local_...' functions are designed to monitor
+# various metrics on the host that Nagios is running on (i.e. this one).
+################################################################################
+
+define command {
+
+ command_name check_local_disk
+ command_line $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
+}
+
+
+
+define command {
+
+ command_name check_local_load
+ command_line $USER1$/check_load -w $ARG1$ -c $ARG2$
+}
+
+
+
+define command {
+
+ command_name check_local_procs
+ command_line $USER1$/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
+}
+
+
+
+define command {
+
+ command_name check_local_users
+ command_line $USER1$/check_users -w $ARG1$ -c $ARG2$
+}
+
+
+
+define command {
+
+ command_name check_local_swap
+ command_line $USER1$/check_swap -w $ARG1$ -c $ARG2$
+}
+
+
+
+define command {
+
+ command_name check_local_mrtgtraf
+ command_line $USER1$/check_mrtgtraf -F $ARG1$ -a $ARG2$ -w $ARG3$ -c $ARG4$ -e $ARG5$
+}
+
+
+
+################################################################################
+# NOTE: The following 'check_...' commands are used to monitor services on
+# both local and remote hosts.
+################################################################################
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in ftp.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+# command_name check_ftp
+# command_line $USER1$/check_ftp -H $HOSTADDRESS$ $ARG1$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in hppjd.cfg, which is part of monitoring-plugins-standard.
+#
+#define command {
+#
+# command_name check_hpjd
+# command_line $USER1$/check_hpjd -H $HOSTADDRESS$ $ARG1$
+#}
+
+
+
+define command {
+
+ command_name check_snmp
+ command_line $USER1$/check_snmp -H $HOSTADDRESS$ $ARG1$
+}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in http.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+# command_name check_http
+# command_line $USER1$/check_http -I $HOSTADDRESS$ $ARG1$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in ssh.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+# command_name check_ssh
+# command_line $USER1$/check_ssh $ARG1$ $HOSTADDRESS$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in dhcp.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+# command_name check_dhcp
+# command_line $USER1$/check_dhcp $ARG1$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in ping.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+# command_name check_ping
+# command_line $USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$ -p 5
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in mail.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+# command_name check_pop
+# command_line $USER1$/check_pop -H $HOSTADDRESS$ $ARG1$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in mail.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+# command_name check_imap
+# command_line $USER1$/check_imap -H $HOSTADDRESS$ $ARG1$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in mail.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+# command_name check_smtp
+# command_line $USER1$/check_smtp -H $HOSTADDRESS$ $ARG1$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in tcp_ucp.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+# command_name check_tcp
+# command_line $USER1$/check_tcp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in tcp_ucp.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+# command_name check_udp
+# command_line $USER1$/check_udp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in nt.cfg, which is part of monitoring-plugins-standard.
+#
+#define command {
+#
+# command_name check_nt
+# command_line $USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$
+#}
+
+
+
+################################################################################
+#
+# SAMPLE PERFORMANCE DATA COMMANDS
+#
+# These are sample performance data commands that can be used to send performance
+# data output to two text files (one for hosts, another for services). If you
+# plan on simply writing performance data out to a file, consider using the
+# host_perfdata_file and service_perfdata_file options in the main config file.
+#
+################################################################################
+
+define command {
+
+ command_name process-host-perfdata
+ command_line /usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /var/lib/nagios4/host-perfdata.out
+}
+
+
+
+define command {
+
+ command_name process-service-perfdata
+ command_line /usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /var/lib/nagios4/service-perfdata.out
+}
--- /dev/null
+###############################################################################
+# CONTACTS.CFG - SAMPLE CONTACT/CONTACTGROUP DEFINITIONS
+#
+#
+# NOTES: This config file provides you with some example contact and contact
+# group definitions that you can reference in host and service
+# definitions.
+#
+# You don't need to keep these definitions in a separate file from your
+# other object definitions. This has been done just to make things
+# easier to understand.
+#
+###############################################################################
+
+
+
+###############################################################################
+#
+# CONTACTS
+#
+###############################################################################
+
+# Just one contact defined by default - the Nagios admin (that's you)
+# This contact definition inherits a lot of default values from the
+# 'generic-contact' template which is defined elsewhere.
+
+define contact {
+
+ contact_name nagiosadmin ; Short name of user
+ use generic-contact ; Inherit default values from generic-contact template (defined above)
+ alias Nagios Admin ; Full name of user
+ email nagios@localhost ; <<***** CHANGE THIS TO YOUR EMAIL ADDRESS ******
+}
+
+
+
+###############################################################################
+#
+# CONTACT GROUPS
+#
+###############################################################################
+
+# We only have one contact in this simple configuration file, so there is
+# no need to create more than one contact group.
+
+define contactgroup {
+
+ contactgroup_name admins
+ alias Nagios Administrators
+ members nagiosadmin
+}
--- /dev/null
+###############################################################################
+# LOCALHOST.CFG - SAMPLE OBJECT CONFIG FILE FOR MONITORING THIS MACHINE
+#
+#
+# NOTE: This config file is intended to serve as an *extremely* simple
+# example of how you can create configuration entries to monitor
+# the local (Linux) machine.
+#
+###############################################################################
+
+
+
+###############################################################################
+#
+# HOST DEFINITION
+#
+###############################################################################
+
+# Define a host for the local machine
+
+define host {
+
+ use linux-server ; Name of host template to use
+ ; This host definition will inherit all variables that are defined
+ ; in (or inherited by) the linux-server host template definition.
+ host_name localhost
+ alias localhost
+ address 127.0.0.1
+}
+
+
+
+###############################################################################
+#
+# HOST GROUP DEFINITION
+#
+###############################################################################
+
+# Define an optional hostgroup for Linux machines
+
+define hostgroup {
+
+ hostgroup_name linux-servers ; The name of the hostgroup
+ alias Linux Servers ; Long name of the group
+ members localhost ; Comma separated list of hosts that belong to this group
+}
+
+
+
+###############################################################################
+#
+# SERVICE DEFINITIONS
+#
+###############################################################################
+
+# Define a service to "ping" the local machine
+
+define service {
+
+ use local-service ; Name of service template to use
+ host_name localhost
+ service_description PING
+ check_command check_ping!100.0,20%!500.0,60%
+}
+
+
+
+# Define a service to check the disk space of the root partition
+# on the local machine. Warning if < 20% free, critical if
+# < 10% free space on partition.
+
+define service {
+
+ use local-service ; Name of service template to use
+ host_name localhost
+ service_description Root Partition
+ check_command check_local_disk!20%!10%!/
+}
+
+
+
+# Define a service to check the number of currently logged in
+# users on the local machine. Warning if > 20 users, critical
+# if > 50 users.
+
+define service {
+
+ use local-service ; Name of service template to use
+ host_name localhost
+ service_description Current Users
+ check_command check_local_users!20!50
+}
+
+
+
+# Define a service to check the number of currently running procs
+# on the local machine. Warning if > 250 processes, critical if
+# > 400 processes.
+
+define service {
+
+ use local-service ; Name of service template to use
+ host_name localhost
+ service_description Total Processes
+ check_command check_local_procs!250!400!RSZDT
+}
+
+
+
+# Define a service to check the load on the local machine.
+
+define service {
+
+ use local-service ; Name of service template to use
+ host_name localhost
+ service_description Current Load
+ check_command check_local_load!5.0,4.0,3.0!10.0,6.0,4.0
+}
+
+
+
+# Define a service to check the swap usage the local machine.
+# Critical if less than 10% of swap is free, warning if less than 20% is free
+
+define service {
+
+ use local-service ; Name of service template to use
+ host_name localhost
+ service_description Swap Usage
+ check_command check_local_swap!20%!10%
+}
+
+
+
+# Define a service to check SSH on the local machine.
+# Disable notifications for this service by default, as not all users may have SSH enabled.
+
+define service {
+
+ use local-service ; Name of service template to use
+ host_name localhost
+ service_description SSH
+ check_command check_ssh
+ notifications_enabled 0
+}
+
+
+
+# Define a service to check HTTP on the local machine.
+# Disable notifications for this service by default, as not all users may have HTTP enabled.
+
+define service {
+
+ use local-service ; Name of service template to use
+ host_name localhost
+ service_description HTTP
+ check_command check_http
+ notifications_enabled 0
+}
--- /dev/null
+###############################################################################
+# PRINTER.CFG - SAMPLE CONFIG FILE FOR MONITORING A NETWORK PRINTER
+#
+#
+# NOTES: This config file assumes that you are using the sample configuration
+# files that get installed with the Nagios quickstart guide.
+#
+###############################################################################
+
+
+
+###############################################################################
+#
+# HOST DEFINITIONS
+#
+###############################################################################
+
+# Define a host for the printer we'll be monitoring
+# Change the host_name, alias, and address to fit your situation
+
+define host {
+
+ use generic-printer ; Inherit default values from a template
+ host_name hplj2605dn ; The name we're giving to this printer
+ alias HP LaserJet 2605dn ; A longer name associated with the printer
+ address 192.168.1.30 ; IP address of the printer
+ hostgroups network-printers ; Host groups this printer is associated with
+}
+
+
+
+###############################################################################
+#
+# HOST GROUP DEFINITIONS
+#
+###############################################################################
+
+# A hostgroup for network printers
+
+define hostgroup {
+
+ hostgroup_name network-printers ; The name of the hostgroup
+ alias Network Printers ; Long name of the group
+}
+
+
+
+###############################################################################
+#
+# SERVICE DEFINITIONS
+#
+###############################################################################
+
+# Create a service for monitoring the status of the printer
+# Change the host_name to match the name of the host you defined above
+# If the printer has an SNMP community string other than "public",
+# change the check_command directive to reflect that
+
+define service {
+
+ use generic-service ; Inherit values from a template
+ host_name hplj2605dn ; The name of the host the service is associated with
+ service_description Printer Status ; The service description
+ check_command check_hpjd!-C public ; The command used to monitor the service
+ check_interval 10 ; Check the service every 10 minutes under normal conditions
+ retry_interval 1 ; Re-check the service every minute until its final/hard state is determined
+}
+
+
+
+# Create a service for "pinging" the printer occasionally.
+# Useful for monitoring RTA, packet loss, etc.
+
+define service {
+
+ use generic-service
+ host_name hplj2605dn
+ service_description PING
+ check_command check_ping!3000.0,80%!5000.0,100%
+ check_interval 10
+ retry_interval 1
+}
--- /dev/null
+###############################################################################
+# SWITCH.CFG - SAMPLE CONFIG FILE FOR MONITORING A SWITCH
+#
+#
+# NOTES: This config file assumes that you are using the sample configuration
+# files that get installed with the Nagios quickstart guide.
+#
+###############################################################################
+
+
+
+###############################################################################
+#
+# HOST DEFINITIONS
+#
+###############################################################################
+
+# Define the switch that we'll be monitoring
+
+define host {
+
+ use generic-switch ; Inherit default values from a template
+ host_name linksys-srw224p ; The name we're giving to this switch
+ alias Linksys SRW224P Switch ; A longer name associated with the switch
+ address 192.168.1.253 ; IP address of the switch
+ hostgroups switches ; Host groups this switch is associated with
+}
+
+
+
+###############################################################################
+#
+# HOST GROUP DEFINITIONS
+#
+###############################################################################
+
+# Create a new hostgroup for switches
+
+define hostgroup {
+
+ hostgroup_name switches ; The name of the hostgroup
+ alias Network Switches ; Long name of the group
+}
+
+
+
+###############################################################################
+#
+# SERVICE DEFINITIONS
+#
+###############################################################################
+
+# Create a service to PING to switch
+
+define service {
+
+ use generic-service ; Inherit values from a template
+ host_name linksys-srw224p ; The name of the host the service is associated with
+ service_description PING ; The service description
+ check_command check_ping!200.0,20%!600.0,60% ; The command used to monitor the service
+ check_interval 5 ; Check the service every 5 minutes under normal conditions
+ retry_interval 1 ; Re-check the service every minute until its final/hard state is determined
+}
+
+
+
+# Monitor uptime via SNMP
+
+define service {
+
+ use generic-service ; Inherit values from a template
+ host_name linksys-srw224p
+ service_description Uptime
+ check_command check_snmp!-C public -o sysUpTime.0
+}
+
+
+
+# Monitor Port 1 status via SNMP
+
+define service {
+
+ use generic-service ; Inherit values from a template
+ host_name linksys-srw224p
+ service_description Port 1 Link Status
+ check_command check_snmp!-C public -o ifOperStatus.1 -r 1 -m RFC1213-MIB
+}
+
+
+
+# Monitor bandwidth via MRTG logs
+
+define service {
+
+ use generic-service ; Inherit values from a template
+ host_name linksys-srw224p
+ service_description Port 1 Bandwidth Usage
+ check_command check_local_mrtgtraf!/var/lib/mrtg/192.168.1.253_1.log!AVG!1000000,1000000!5000000,5000000!10
+}
--- /dev/null
+###############################################################################
+# TEMPLATES.CFG - SAMPLE OBJECT TEMPLATES
+#
+#
+# NOTES: This config file provides you with some example object definition
+# templates that are referred by other host, service, contact, etc.
+# definitions in other config files.
+#
+# You don't need to keep these definitions in a separate file from your
+# other object definitions. This has been done just to make things
+# easier to understand.
+#
+###############################################################################
+
+
+
+###############################################################################
+#
+# CONTACT TEMPLATES
+#
+###############################################################################
+
+# Generic contact definition template
+# This is NOT a real contact, just a template!
+
+define contact {
+
+ name generic-contact ; The name of this contact template
+ service_notification_period 24x7 ; service notifications can be sent anytime
+ host_notification_period 24x7 ; host notifications can be sent anytime
+ service_notification_options w,u,c,r,f,s ; send notifications for all service states, flapping events, and scheduled downtime events
+ host_notification_options d,u,r,f,s ; send notifications for all host states, flapping events, and scheduled downtime events
+ service_notification_commands notify-service-by-email ; send service notifications via email
+ host_notification_commands notify-host-by-email ; send host notifications via email
+ register 0 ; DON'T REGISTER THIS DEFINITION - ITS NOT A REAL CONTACT, JUST A TEMPLATE!
+}
+
+
+
+###############################################################################
+#
+# HOST TEMPLATES
+#
+###############################################################################
+
+# Generic host definition template
+# This is NOT a real host, just a template!
+
+define host {
+
+ name generic-host ; The name of this host template
+ notifications_enabled 1 ; Host notifications are enabled
+ event_handler_enabled 1 ; Host event handler is enabled
+ flap_detection_enabled 1 ; Flap detection is enabled
+ process_perf_data 1 ; Process performance data
+ retain_status_information 1 ; Retain status information across program restarts
+ retain_nonstatus_information 1 ; Retain non-status information across program restarts
+ notification_period 24x7 ; Send host notifications at any time
+ register 0 ; DON'T REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
+}
+
+
+
+# Linux host definition template
+# This is NOT a real host, just a template!
+
+define host {
+
+ name linux-server ; The name of this host template
+ use generic-host ; This template inherits other values from the generic-host template
+ check_period 24x7 ; By default, Linux hosts are checked round the clock
+ check_interval 5 ; Actively check the host every 5 minutes
+ retry_interval 1 ; Schedule host check retries at 1 minute intervals
+ max_check_attempts 10 ; Check each Linux host 10 times (max)
+ check_command check-host-alive ; Default command to check Linux hosts
+ notification_period workhours ; Linux admins hate to be woken up, so we only notify during the day
+ ; Note that the notification_period variable is being overridden from
+ ; the value that is inherited from the generic-host template!
+ notification_interval 120 ; Resend notifications every 2 hours
+ notification_options d,u,r ; Only send notifications for specific host states
+ contact_groups admins ; Notifications get sent to the admins by default
+ register 0 ; DON'T REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
+}
+
+
+
+
+# Windows host definition template
+# This is NOT a real host, just a template!
+
+define host {
+
+ name windows-server ; The name of this host template
+ use generic-host ; Inherit default values from the generic-host template
+ check_period 24x7 ; By default, Windows servers are monitored round the clock
+ check_interval 5 ; Actively check the server every 5 minutes
+ retry_interval 1 ; Schedule host check retries at 1 minute intervals
+ max_check_attempts 10 ; Check each server 10 times (max)
+ check_command check-host-alive ; Default command to check if servers are "alive"
+ notification_period 24x7 ; Send notification out at any time - day or night
+ notification_interval 30 ; Resend notifications every 30 minutes
+ notification_options d,r ; Only send notifications for specific host states
+ contact_groups admins ; Notifications get sent to the admins by default
+ hostgroups windows-servers ; Host groups that Windows servers should be a member of
+ register 0 ; DON'T REGISTER THIS - ITS JUST A TEMPLATE
+}
+
+
+
+# We define a generic printer template that can
+# be used for most printers we monitor
+
+define host {
+
+ name generic-printer ; The name of this host template
+ use generic-host ; Inherit default values from the generic-host template
+ check_period 24x7 ; By default, printers are monitored round the clock
+ check_interval 5 ; Actively check the printer every 5 minutes
+ retry_interval 1 ; Schedule host check retries at 1 minute intervals
+ max_check_attempts 10 ; Check each printer 10 times (max)
+ check_command check-host-alive ; Default command to check if printers are "alive"
+ notification_period workhours ; Printers are only used during the workday
+ notification_interval 30 ; Resend notifications every 30 minutes
+ notification_options d,r ; Only send notifications for specific host states
+ contact_groups admins ; Notifications get sent to the admins by default
+ register 0 ; DON'T REGISTER THIS - ITS JUST A TEMPLATE
+}
+
+
+
+# Define a template for switches that we can reuse
+define host {
+
+ name generic-switch ; The name of this host template
+ use generic-host ; Inherit default values from the generic-host template
+ check_period 24x7 ; By default, switches are monitored round the clock
+ check_interval 5 ; Switches are checked every 5 minutes
+ retry_interval 1 ; Schedule host check retries at 1 minute intervals
+ max_check_attempts 10 ; Check each switch 10 times (max)
+ check_command check-host-alive ; Default command to check if routers are "alive"
+ notification_period 24x7 ; Send notifications at any time
+ notification_interval 30 ; Resend notifications every 30 minutes
+ notification_options d,r ; Only send notifications for specific host states
+ contact_groups admins ; Notifications get sent to the admins by default
+ register 0 ; DON'T REGISTER THIS - ITS JUST A TEMPLATE
+}
+
+
+
+###############################################################################
+#
+# SERVICE TEMPLATES
+#
+###############################################################################
+
+# Generic service definition template
+# This is NOT a real service, just a template!
+
+define service {
+
+ name generic-service ; The 'name' of this service template
+ active_checks_enabled 1 ; Active service checks are enabled
+ passive_checks_enabled 1 ; Passive service checks are enabled/accepted
+ parallelize_check 1 ; Active service checks should be parallelized (disabling this can lead to major performance problems)
+ obsess_over_service 1 ; We should obsess over this service (if necessary)
+ check_freshness 0 ; Default is to NOT check service 'freshness'
+ notifications_enabled 1 ; Service notifications are enabled
+ event_handler_enabled 1 ; Service event handler is enabled
+ flap_detection_enabled 1 ; Flap detection is enabled
+ process_perf_data 1 ; Process performance data
+ retain_status_information 1 ; Retain status information across program restarts
+ retain_nonstatus_information 1 ; Retain non-status information across program restarts
+ is_volatile 0 ; The service is not volatile
+ check_period 24x7 ; The service can be checked at any time of the day
+ max_check_attempts 3 ; Re-check the service up to 3 times in order to determine its final (hard) state
+ check_interval 10 ; Check the service every 10 minutes under normal conditions
+ retry_interval 2 ; Re-check the service every two minutes until a hard state can be determined
+ contact_groups admins ; Notifications get sent out to everyone in the 'admins' group
+ notification_options w,u,c,r ; Send notifications about warning, unknown, critical, and recovery events
+ notification_interval 60 ; Re-notify about service problems every hour
+ notification_period 24x7 ; Notifications can be sent out at any time
+ register 0 ; DON'T REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
+}
+
+
+
+# Local service definition template
+# This is NOT a real service, just a template!
+
+define service {
+
+ name local-service ; The name of this service template
+ use generic-service ; Inherit default values from the generic-service definition
+ max_check_attempts 4 ; Re-check the service up to 4 times in order to determine its final (hard) state
+ check_interval 5 ; Check the service every 5 minutes under normal conditions
+ retry_interval 1 ; Re-check the service every minute until a hard state can be determined
+ register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
+}
--- /dev/null
+###############################################################################
+# TIMEPERIODS.CFG - SAMPLE TIMEPERIOD DEFINITIONS
+#
+#
+# NOTES: This config file provides you with some example timeperiod definitions
+# that you can reference in host, service, contact, and dependency
+# definitions.
+#
+# You don't need to keep timeperiods in a separate file from your other
+# object definitions. This has been done just to make things easier to
+# understand.
+#
+###############################################################################
+
+
+
+###############################################################################
+#
+# TIMEPERIOD DEFINITIONS
+#
+###############################################################################
+
+# This defines a timeperiod where all times are valid for checks,
+# notifications, etc. The classic "24x7" support nightmare. :-)
+
+define timeperiod {
+
+ name 24x7
+ timeperiod_name 24x7
+ alias 24 Hours A Day, 7 Days A Week
+
+ sunday 00:00-24:00
+ monday 00:00-24:00
+ tuesday 00:00-24:00
+ wednesday 00:00-24:00
+ thursday 00:00-24:00
+ friday 00:00-24:00
+ saturday 00:00-24:00
+}
+
+
+
+# This defines a timeperiod that is normal workhours for
+# those of us monitoring networks and such in the U.S.
+
+define timeperiod {
+
+ name workhours
+ timeperiod_name workhours
+ alias Normal Work Hours
+
+ monday 09:00-17:00
+ tuesday 09:00-17:00
+ wednesday 09:00-17:00
+ thursday 09:00-17:00
+ friday 09:00-17:00
+}
+
+
+
+# This defines the *perfect* check and notification
+# timeperiod
+
+define timeperiod {
+
+ name none
+ timeperiod_name none
+ alias No Time Is A Good Time
+}
+
+
+
+# Some U.S. holidays
+# Note: The timeranges for each holiday are meant to *exclude* the holidays from being
+# treated as a valid time for notifications, etc. You probably don't want your pager
+# going off on New Year's. Although your employer might... :-)
+
+define timeperiod {
+
+ name us-holidays
+ timeperiod_name us-holidays
+ alias U.S. Holidays
+
+ january 1 00:00-00:00 ; New Years
+ monday -1 may 00:00-00:00 ; Memorial Day (last Monday in May)
+ july 4 00:00-00:00 ; Independence Day
+ monday 1 september 00:00-00:00 ; Labor Day (first Monday in September)
+ thursday 4 november 00:00-00:00 ; Thanksgiving (4th Thursday in November)
+ december 25 00:00-00:00 ; Christmas
+}
+
+
+
+# This defines a modified "24x7" timeperiod that covers every day of the
+# year, except for U.S. holidays (defined in the timeperiod above).
+
+define timeperiod {
+
+ name 24x7_sans_holidays
+ timeperiod_name 24x7_sans_holidays
+ alias 24x7 Sans Holidays
+
+ use us-holidays ; Get holiday exceptions from other timeperiod
+
+ sunday 00:00-24:00
+ monday 00:00-24:00
+ tuesday 00:00-24:00
+ wednesday 00:00-24:00
+ thursday 00:00-24:00
+ friday 00:00-24:00
+ saturday 00:00-24:00
+}
--- /dev/null
+###############################################################################
+# WINDOWS.CFG - SAMPLE CONFIG FILE FOR MONITORING A WINDOWS MACHINE
+#
+#
+# NOTES: This config file assumes that you are using the sample configuration
+# files that get installed with the Nagios quickstart guide.
+#
+###############################################################################
+
+
+
+###############################################################################
+#
+# HOST DEFINITIONS
+#
+###############################################################################
+
+# Define a host for the Windows machine we'll be monitoring
+# Change the host_name, alias, and address to fit your situation
+
+define host {
+
+ use windows-server ; Inherit default values from a template
+ host_name winserver ; The name we're giving to this host
+ alias My Windows Server ; A longer name associated with the host
+ address 192.168.1.2 ; IP address of the host
+}
+
+
+
+###############################################################################
+#
+# HOST GROUP DEFINITIONS
+#
+###############################################################################
+
+# Define a hostgroup for Windows machines
+# All hosts that use the windows-server template will automatically be a member of this group
+
+define hostgroup {
+
+ hostgroup_name windows-servers ; The name of the hostgroup
+ alias Windows Servers ; Long name of the group
+}
+
+
+
+###############################################################################
+#
+# SERVICE DEFINITIONS
+#
+###############################################################################
+
+# Create a service for monitoring the version of NSCLient++ that is installed
+# Change the host_name to match the name of the host you defined above
+
+define service {
+
+ use generic-service
+ host_name winserver
+ service_description NSClient++ Version
+ check_command check_nt!CLIENTVERSION
+}
+
+
+
+# Create a service for monitoring the uptime of the server
+# Change the host_name to match the name of the host you defined above
+
+define service {
+
+ use generic-service
+ host_name winserver
+ service_description Uptime
+ check_command check_nt!UPTIME
+}
+
+
+
+# Create a service for monitoring CPU load
+# Change the host_name to match the name of the host you defined above
+
+define service {
+
+ use generic-service
+ host_name winserver
+ service_description CPU Load
+ check_command check_nt!CPULOAD!-l 5,80,90
+}
+
+
+
+# Create a service for monitoring memory usage
+# Change the host_name to match the name of the host you defined above
+
+define service {
+
+ use generic-service
+ host_name winserver
+ service_description Memory Usage
+ check_command check_nt!MEMUSE!-w 80 -c 90
+}
+
+
+
+# Create a service for monitoring C:\ disk usage
+# Change the host_name to match the name of the host you defined above
+
+define service {
+
+ use generic-service
+ host_name winserver
+ service_description C:\ Drive Space
+ check_command check_nt!USEDDISKSPACE!-l c -w 80 -c 90
+}
+
+
+
+# Create a service for monitoring the W3SVC service
+# Change the host_name to match the name of the host you defined above
+
+define service {
+
+ use generic-service
+ host_name winserver
+ service_description W3SVC
+ check_command check_nt!SERVICESTATE!-d SHOWALL -l W3SVC
+}
+
+
+
+# Create a service for monitoring the Explorer.exe process
+# Change the host_name to match the name of the host you defined above
+
+define service {
+
+ use generic-service
+ host_name winserver
+ service_description Explorer
+ check_command check_nt!PROCSTATE!-d SHOWALL -l Explorer.exe
+}
projects / sysconfig / nagios3.git / commitdiff